N.S. Golf Shaft Standard Trimming Spec's

When re-shafting, be sure to observe the standard trimming
specifications shown in the table below to ensure that the
shaft's original characteristics are maintained to the fullest.

• Tip trim shows the length that can be cut off from the shaft
  tip. If it is 0, trimming should be done from the shaft butt
  (grip side) only.
• First, cut off the tip by following the specifications shown in
  the table on the right. Then attach the club head and cut
  from the butt to the standard club length.
• The table shows recommended trimming specifications. You
  may custom-trim to adjust flex according to your personal
  preferences. However, excessive trimming that significantly
  exceeds the specified lengths may degrade the strength
  of the shaft.
• Wood shafts do not support through bores, but can be
  directly used with blind-bore heads. (Using through bores
  will cause the shaft to harden slightly.)

STEEL

N.S.PRO 950GH

IRON	#1IRON	#2IRON	#3IRON	#4IRON	#5IRON	#6IRON	#7IRON	#8IRON	#9IRON	PW.AW	SW
Pre-trim Shaft Length and Tip Trim(inch)	39.5	39.0	38.5	38.0	37.5	37.0	36.5	36.0	35.5	35.0	35.0
	0	0	0	0	0	0	0	0	0	0	0

N.S.PRO 950FW

WOOD	#3WOOD	#4WOOD	#5WOOD	#7WOOD	#9WOOD	#11WOOD
Pre-trim Shaft Length and Tip Trim(inch)	43.0	43.0	42.0	42.0	41.0	41.0
	0	0.5	0	0.5	0	0.5

N.S.PRO 950GH WF

IRON	#1IRON	#2IRON	#3IRON	#4IRON	#5IRON	#6IRON	#7IRON	#8IRON	#9IRON	PW.AW	SW
Pre-trim Shaft Length and Tip Trim(inch)	39.5	39.0	38.5	38.0	37.5	37.0	36.5	36.0	35.5	35.0	35.0
	0	0	0	0	0	0	0	0	0	0	0

N.S.PRO 850GH

IRON	#1IRON	#2IRON	#3IRON	#4IRON	#5IRON	#6IRON	#7IRON	#8IRON	#9IRON	PW.AW	SW
Pre-trim Shaft Length and Tip Trim(inch)	39.5	39.0	38.5	38.0	37.5	37.0	36.5	36.0	35.5	35.0	35.0
	0	0	0	0	0	0	0	0	0	0	0

N.S.PRO 850FW

WOOD	#5WOOD	#7WOOD	#9WOOD	#11WOOD
Pre-trim Shaft Length and Tip Trim(inch)	42.0	42.0	41.0	41.0
	0	0.5	0	0.5

GRAPHITE

N.S.PRO GT SERIES<WOOD>

WOOD	#1WOOD
Pre-trim Shaft Length and Tip Trim(inch)	GT500/47 GT600/46 GT700/46 GT800/45
	0

N.S.PRO GT ELEGANCE

WOOD	#1WOOD
Pre-trim Shaft Length and Tip Trim(inch)	47.0
	0

N.S.PRO GT SERIES<FW>

WOOD	#3WOOD	#4WOOD	#5WOOD	#7WOOD	#9WOOD
Pre-trim Shaft Length and Tip Trim(inch)	44.0	44.0	44.0	44.0	44.0
	0	0.5	1.0	1.5	2.0

N.S.PRO GT SERIES<IRON>

IRON		#3IRON	#4IRON	#5IRON	#6IRON	#7IRON	#8IRON	#9IRON	PW.AW	SW
Pre-trim Shaft Length and Tip Trim(inch)	GT500	39.5	39.0	38.5	38.0	37.5	37.0	36.5	36.0	36.0
		0	0	0	0	0	0	0	0	0
	GT600 GT700 GT800	39.0	38.5	38.0	37.5	37.0	36.5	36.0	35.5	35.5
		0	0	0	0	0	0	0	0	0

N.S.PRO TOUR<WOOD>

WOOD	#1WOOD
Pre-trim Shaft Length and Tip Trim(inch)	TYPE 65/46 TYPE 75/46 TYPE 85/45
	0

MALISTA Kick Adjust<WOOD>

WOOD	#1WOOD	#3WOOD
Pre-trim Shaft Length and Tip Trim(inch)	45.0	45.0
	0	1.0

MALISTA SL-60<WOOD>

WOOD	#1WOOD	#3WOOD
Pre-trim Shaft Length and Tip Trim(inch)	45.0	45.0
	0	1.0

MALISTA Kick Adjust<IRON>

IRON	#2IRON	#3IRON	#4IRON	#5IRON	#6IRON	#7IRON	#8IRON	#9IRON	PW.AW	SW
Pre-trim Shaft Length and Tip Trim(inch)	39.5	39.0	38.5	38.0	37.5	37.0	36.5	36.0	35.5	35.5
	0	0	0	0	0	0	0	0	0	0

MALISTA SL-60<IRON>

IRON	#2IRON	#3IRON	#4IRON	#5IRON	#6IRON	#7IRON	#8IRON	#9IRON	PW.AW	SW
Pre-trim Shaft Length and Tip Trim(inch)	39.5	39.0	38.5	38.0	37.5	37.0	36.5	36.0	35.5	35.5
	0	0	0	0	0	0	0	0	0	0

MX-3000<WOOD>

WOOD	#1WOOD	#3WOOD
Pre-trim Shaft Length and Tip Trim(inch)	44.0	44.0
	0	1.0

FX-5000<WOOD>

WOOD	#1WOOD	#3WOOD
Pre-trim Shaft Length and Tip Trim(inch)	45.0	45.0
	0	1.0

MX-3000<IRON>

IRON	#3IRON	#4IRON	#5IRON	#6IRON	#7IRON	#8IRON	#9IRON	PW.AW	SW
Pre-trim Shaft Length and Tip Trim(inch)	39.0	39.0	39.0	39.0	37.0	37.0	37.0	37.0	37.0
	0	0.5	1.0	1.5	0	0.5	1.0	1.5	1.5

FX-5000<IRON>

IRON	#3IRON	#4IRON	#5IRON	#6IRON	#7IRON	#8IRON	#9IRON	PW.AW	SW
Pre-trim Shaft Length and Tip Trim(inch)	39.0	39.0	39.0	39.0	39.0	39.0	39.0	39.0	39.0
	0	0.5	1.0	1.5	2.0	2.5	3.0	3.5	3.5